HCTS0060A 100mV/A High Frequency Flexible Current Probe 30MHz
Bandwidth , 0.06KA Peak Current For Power Bus Monitoring
Precise current measurement
Sensitivity 100mV/A, typical accuracy 2%, can accurately measure
current, effectively measure the harmonic composition in the
current, and provide reliable data for circuit analysis.
Excellent high-frequency response
The high-frequency bandwidth of 30MHz can accurately detect
high-frequency sinusoidal current waveforms, and has obvious
advantages in high-frequency scenarios such as semiconductor switch
current measurement.
Adapt to small package devices
The small and soft induction loop has an outer diameter of 1.6mm
(1.7mm Max) and a withstand voltage of 1KVpk, which is an ideal
choice for current measurement of small package devices, such as
IGBT and MOSFET pin current measurement.
Low insertion loss
The insertion loss is extremely low, only a few picohenries, and
there is almost no interference to the circuit under test. The
standard BNC interface is convenient for connecting various
measurement devices.
Flexible power supply and operation
It adopts USB 5V power supply and is simple to operate. Follow
safety precautions when using, such as checking the probe ring,
staying away from interference sources, etc., to ensure accurate
measurement.
Specifications
| Model | HCTS0060A |
| Sensitivity (mV/A) | 100 |
| Peak | Current (KA) | 0.06 |
dI/dt(KA/μs) | 4 |
| Maximum noise (mV Vpp) | 20 |
| Attenuation characteristics(%/ms) | 65 |
| Low frequency bandwidth -3dB(Hz) | 67 |
| High frequency bandwidth -3dB(MHz) | 30 |
| Typical accuracy | 2% |
| Insulation voltage value | 1KV |
HCT(S)XXXXA Series Other Technical Parameters
| Maximum output voltage | 6Vpk |
| Terminal load | ≥100kΩ |
| Power supply mode | USB 5V (standard adapter) |
| Operating temperature range | Integrator | 0℃ - 50℃ |
| Probe ring | 0℃ - 100℃ |
| Storage temperature range | -40℃～80℃ |
Product Description
(Take HCTS0120A as an example)
1) Input interface: current probe test signal input terminal.
2) Output interface: current probe integrator signal output
terminal.
3) USB 5V power supply interface: standard USB (type B) interface.
(USB power supply cable and power adapter are standard)
4) Test connection diagram.
Mechanical specifications
| Model | HCTSXXXXA |
| Typical value of flexible probe circumference (customizable) | 80mm |
| Typical value of induction ring body diameter | 1.6mm |
| Typical value of flexible probe diameter (customizable) | 25mm |
| Induction loop connection cable length | 1 M (customizable) |
| BNC connection cable length | 1 M or 2 M, 1 M is Standard |
Integrator body dimensions (including BN port dimensions) | About 110(L)*47(W)*30(H)mm |
| USB cable (AM-BM) | About 1.8m |
| USB output adapter | About 59mm*30mm*20mm |
| Probe weight | About 150g |
| Box weight (including probe) | About 960g |
Care And Maintenance
1) Keep the probe clean and dry.
2) If cleaning is required, wipe with a soft dry cloth. Do not use
chemical cleaning agents.
3) When the probe is not in use, please put it in the packaging
provided and place it in a cool, clean and dry place.
4) When transporting the probe, be sure to put it in the packaging
provided by our company to prevent shock.
5) Do not pull the input and output lines hard to avoid excessive
twisting, bending or knotting.
Packing List
| Name | Quantity |
| Current probe integrator | 1 piece |
| Current probe flexible induction coil | 1 piece |
| USB output adapter (5V/1A) | 1 piece |
| USB power cable | 1 piece |
| BNC output cable | 1 piece |
| Electronic manual | 1 serving |
