MEASTEK HCTM6000A Ultra-high Current Measurement High Frequency
Probe 6.0KA Peak Measurement For Power System Harmonic Monitoring
1.Ultra-high current measurement capability
With a sensitivity of 1mV/A, it can accurately measure peak
currents up to 6.0KA. It is an ideal choice for ultra-high current
measurement scenarios such as large industrial facilities and power
hubs, providing you with a reliable high current measurement
solution.
2.Extremely low noise level
With a maximum noise of 7mV Vpp, it ensures extremely low noise
interference while measuring ultra-large ranges, providing you with
accurate and stable current measurement results.
3.Stable attenuation performance
The attenuation characteristic is 0.25%/ms, which effectively
reduces the signal attenuation error during the measurement process
and ensures long-term, high-precision current measurement. Whether
it is short-term troubleshooting or long-term equipment monitoring,
it can provide you with reliable data support.
4.Safe and reliable insulation protection
With an insulation voltage value of 2KV, it provides you with
all-round safety protection in ultra-high voltage and high current
measurement environments.
5.Professional industrial-grade design
It adopts the design standards of industrial-grade current probes,
has good durability and stability, and can adapt to harsh
industrial environments.
Specifications
| Model | HCTM6000A |
| Sensitivity (mV/A) | 1 |
| Peak | Current (KA) | 6.0 |
dI/dt(KA/μs) | 40 |
| Maximum noise (mV Vpp) | 7 |
| Attenuation characteristics(%/ms) | 0.25 |
| Low frequency bandwidth -3dB(Hz) | 0.3 |
| High frequency bandwidth -3dB(MHz) | 15 |
| Typical accuracy | 2% |
| Insulation voltage value | 2KV |
HCT(S)XXXXA Series Other Technical Parameters
| Maximum output voltage | 6Vpk |
| Terminal load | ≥100kΩ |
| Power supply mode | USB 5V (standard adapter) |
| Operating temperature range | Integrator | 0℃ - 50℃ |
| Probe ring | 0℃ - 100℃ |
| Storage temperature range | -40℃～80℃ |
Product Description
(Take HCTS0120A as an example)
1) Input interface: current probe test signal input terminal.
2) Output interface: current probe integrator signal output
terminal.
3) USB 5V power supply interface: standard USB (type B) interface.
(USB power supply cable and power adapter are standard)
4) Test connection diagram.
Mechanical specifications
| Model | HCTSXXXXA |
| Typical value of flexible probe circumference (customizable) | 80mm |
| Typical value of induction ring body diameter | 1.6mm |
| Typical value of flexible probe diameter (customizable) | 25mm |
| Induction loop connection cable length | 1 M (customizable) |
| BNC connection cable length | 1 M or 2 M, 1 M is Standard |
Integrator body dimensions (including BN port dimensions) | About 110(L)*47(W)*30(H)mm |
| USB cable (AM-BM) | About 1.8m |
| USB output adapter | About 59mm*30mm*20mm |
| Probe weight | About 150g |
| Box weight (including probe) | About 960g |
Care And Maintenance
1) Keep the probe clean and dry.
2) If cleaning is required, wipe with a soft dry cloth. Do not use
chemical cleaning agents.
3) When the probe is not in use, please put it in the packaging
provided and place it in a cool, clean and dry place.
4) When transporting the probe, be sure to put it in the packaging
provided by our company to prevent shock.
5) Do not pull the input and output lines hard to avoid excessive
twisting, bending or knotting.
Packing List
| Name | Quantity |
| Current probe integrator | 1 piece |
| Current probe flexible induction coil | 1 piece |
| USB output adapter (5V/1A) | 1 piece |
| USB power cable | 1 piece |
| BNC output cable | 1 piece |
| Electronic manual | 1 serving |
