MEASTEK HCTM060KA Industrial Automation High Frequency Flexible
Current Probe Ultra-high Current High-precision Probe For Motor
Current Detection
Ultra-high current accurate capture
With a sensitivity of 0.1mV/A, it can accurately measure ultra-high
currents with a peak current of up to 60KA, providing accurate
current measurement services for large power facilities,
super-large industrial equipment, etc., helping you to gain an
in-depth understanding of the operating conditions of the
equipment.
Minimal attenuation error
The attenuation characteristic is 0.06%/ms. During the long-term
measurement process, the signal attenuation error is controlled
within a very small range, ensuring the long-term stability and
accuracy of the measurement data, allowing you to accurately grasp
the current change trend of the equipment.
Fully upgraded safety guarantee
The insulation voltage value is 2KV, providing you with all-round
and high-standard safety protection in the extreme measurement
environment of ultra-high voltage and high current, effectively
preventing the occurrence of electrical accidents and ensuring your
personal and equipment safety.
Professional customized service
According to your special needs, we can provide customized probe
design and measurement solutions to meet your personalized needs
for ultra-high current measurement in different scenarios, and
provide you with exclusive measurement services.
Use scenarios
large arc furnace current monitoring in super-large steel
enterprises; motor current detection in large water conservancy hub
pumping stations; ultra-large current measurement in new energy
research and development experiments.
Specifications
| Model | HCTM060KA |
| Sensitivity (mV/A) | 0.1 |
| Peak | Current (KA) | 60 |
dI/dt(KA/μs) | 40 |
| Maximum noise (mV Vpp) | 5 |
| Attenuation characteristics(%/ms) | 0.06 |
| Low frequency bandwidth -3dB(Hz) | 0.06 |
| High frequency bandwidth -3dB(MHz) | 15 |
| Typical accuracy | 2% |
| Insulation voltage value | 2KV |
HCT(S)XXXXA Series Other Technical Parameters
| Maximum output voltage | 6Vpk |
| Terminal load | ≥100kΩ |
| Power supply mode | USB 5V (standard adapter) |
| Operating temperature range | Integrator | 0℃ - 50℃ |
| Probe ring | 0℃ - 100℃ |
| Storage temperature range | -40℃～80℃ |
Product Description
(Take HCTS0120A as an example)
1) Input interface: current probe test signal input terminal.
2) Output interface: current probe integrator signal output
terminal.
3) USB 5V power supply interface: standard USB (type B) interface.
(USB power supply cable and power adapter are standard)
4) Test connection diagram.
Mechanical specifications
| Model | HCTSXXXXA |
| Typical value of flexible probe circumference (customizable) | 80mm |
| Typical value of induction ring body diameter | 1.6mm |
| Typical value of flexible probe diameter (customizable) | 25mm |
| Induction loop connection cable length | 1 M (customizable) |
| BNC connection cable length | 1 M or 2 M, 1 M is Standard |
Integrator body dimensions (including BN port dimensions) | About 110(L)*47(W)*30(H)mm |
| USB cable (AM-BM) | About 1.8m |
| USB output adapter | About 59mm*30mm*20mm |
| Probe weight | About 150g |
| Box weight (including probe) | About 960g |
Care And Maintenance
1) Keep the probe clean and dry.
2) If cleaning is required, wipe with a soft dry cloth. Do not use
chemical cleaning agents.
3) When the probe is not in use, please put it in the packaging
provided and place it in a cool, clean and dry place.
4) When transporting the probe, be sure to put it in the packaging
provided by our company to prevent shock.
5) Do not pull the input and output lines hard to avoid excessive
twisting, bending or knotting.
Packing List
| Name | Quantity |
| Current probe integrator | 1 piece |
| Current probe flexible induction coil | 1 piece |
| USB output adapter (5V/1A) | 1 piece |
| USB power cable | 1 piece |
| BNC output cable | 1 piece |
| Electronic manual | 1 serving |
