MEASTEK Essential HCTL060KA High - Frequency Flexible Current Probe
For Industrial Power Grid Monitoring
1. Excellent bandwidth performance
With a high-frequency bandwidth of 10MHz, it can accurately detect
high-frequency sinusoidal current waveforms. It performs well in
scenarios such as industrial power grid harmonic monitoring and
high-frequency power equipment current detection, and can
effectively meet the needs of the industrial field for
high-frequency current signal analysis.
2. High sensitivity and high precision
The sensitivity of 0.1mV/A is matched with a typical accuracy of
1%. It can not only measure tiny currents, but also accurately
measure tiny phase shifts of sine waves. It is suitable for current
monitoring scenarios such as industrial automation equipment and
precision electronic instruments that require extremely high
current measurement accuracy.
3. High voltage withstand capability
The insulation withstand voltage value of 10KV enables it to be
safely and reliably applied to large current and high voltage
industrial power grid current measurement, and it can work stably
in high-voltage environments such as high-voltage power
transmission lines and large industrial distribution cabinets to
ensure measurement safety.
4. Flexible design advantage
The outer diameter of the probe ring is 8mm and it is soft and
bendable. In the distributed current monitoring scenario, it can be
flexibly installed in various places of the industrial power grid
line, easily adapt to complex wiring environments, and facilitate
the monitoring of currents at different locations.
5. Convenient connection and power supply
USB power supply is adopted, which is convenient to operate. The
standard BNC output interface is convenient for connecting various
measuring instruments such as oscilloscopes and data collectors, so
that engineers can realize real-time collection and analysis of
industrial power grid current data.
6. Customized service support
The length of the probe ring and the connecting line can be
customized according to customer requirements, which can meet the
needs of special test environments and equipment in the industrial
field, and provide measurement solutions that are more suitable for
practical applications.
Specifications
| Model | HCTL060KA |
| Sensitivity (mV/A) | 0.1 |
| Peak | Current (KA) | 60 |
dI/dt(KA/μs) | 40 |
| Maximum noise (mV Vpp) | 3 |
| Attenuation characteristics(%/ms) | 0.1 |
| Low frequency bandwidth -3dB(Hz) | 0.1 |
| High frequency bandwidth -3dB(MHz) | 10 |
| Typical accuracy | 1% |
| Insulation voltage value | 10KV |
HCT(S)XXXXA Series Other Technical Parameters
| Maximum output voltage | 6Vpk |
| Terminal load | ≥100kΩ |
| Power supply mode | USB 5V (standard adapter) |
| Operating temperature range | Integrator | 0℃ - 50℃ |
| Probe ring | 0℃ - 100℃ |
| Storage temperature range | -40℃～80℃ |
Product Description
(Take HCTS0120A as an example)
1) Input interface: current probe test signal input terminal.
2) Output interface: current probe integrator signal output
terminal.
3) USB 5V power supply interface: standard USB (type B) interface.
(USB power supply cable and power adapter are standard)
4) Test connection diagram.
Mechanical specifications
| Model | HCTSXXXXA |
| Typical value of flexible probe circumference (customizable) | 80mm |
| Typical value of induction ring body diameter | 1.6mm |
| Typical value of flexible probe diameter (customizable) | 25mm |
| Induction loop connection cable length | 1 M (customizable) |
| BNC connection cable length | 1 M or 2 M, 1 M is Standard |
Integrator body dimensions (including BN port dimensions) | About 110(L)*47(W)*30(H)mm |
| USB cable (AM-BM) | About 1.8m |
| USB output adapter | About 59mm*30mm*20mm |
| Probe weight | About 150g |
| Box weight (including probe) | About 960g |
Care And Maintenance
1) Keep the probe clean and dry.
2) If cleaning is required, wipe with a soft dry cloth. Do not use
chemical cleaning agents.
3) When the probe is not in use, please put it in the packaging
provided and place it in a cool, clean and dry place.
4) When transporting the probe, be sure to put it in the packaging
provided by our company to prevent shock.
5) Do not pull the input and output lines hard to avoid excessive
twisting, bending or knotting.
Packing List
| Name | Quantity |
| Current probe integrator | 1 piece |
| Current probe flexible induction coil | 1 piece |
| USB output adapter (5V/1A) | 1 piece |
| USB power cable | 1 piece |
| BNC output cable | 1 piece |
| Electronic manual | 1 serving |
