MEASTEK Direct Connect Industrial Probe LCTD Series Low frequency Flexible Current Probe, Global Voltage Adaptation

Product Introduction

LCT flexible current probe is a current conversion device based on industrial-grade flexible Rogowski coil, suitable for the measurement and control of various AC large currents, and widely used in high-power load analysis, pulse current monitoring, DC ripple measurement, etc. Due to the many advantages of Rogowski coil, it can solve many problems that traditional CT cannot solve, and is a perfect solution to replace traditional CT.

Features
1. Good linearity, output linearity can reach 0.1%, truly reproducing the waveform of the measured current;
2. High accuracy. The overall accuracy of the product is within ±0.5% in the rated current range of 20% to 100%; the overall accuracy of the product is within ±1.0% in the rated current range of 10% to 20%;
3. Wide frequency band, the frequency band can reach 100kHz (can be customized according to needs), good harmonic consistency, and correct transmission of each harmonic;
4. Extremely small phase shift, 50Hz phase shift is less than 0.7 degrees, which is less than the national standard value;
5. Excellent high-frequency response characteristics, can be widely used in signal detection of high-frequency harmonics, complex waveforms, current surges, etc.;
6. No magnetic saturation phenomenon, wide input range, up to hundreds of kA, inheriting the excellent characteristics of Rogowski coil;
7. Small size, light weight, compared with traditional mutual inductors, it has significant advantages in energy saving and environmental protection.

Functional Highlights:
Direct connection interface: No need for adapter, directly connect to oscilloscope or data acquisition equipment to reduce signal loss.
High current support: Rated input current up to 50kA (RMS), suitable for high load scenarios such as electric furnace transformers and arc faults.
Flexible customization: Coil circumference (200mm-700mm), power supply voltage (5V/12V/24V), output type (V/A/U/I) can all be customized on demand.

Typical Application Scenarios:
Industrial power system: electric furnace secondary side current measurement, medium and high voltage switchgear protection.
Fault diagnosis: arc fault current detection, capacitor discharge monitoring.
High current monitoring: lightning impulse current analysis, DC ripple measurement.

Technical Specifications

Note: The parameter indicators of the orange filled part are customizable and can be customized according to actual needs.

Packing List

Measurement Considerations

1) To ensure the measurement accuracy, the measured wire should pass through the center of the probe ring during measurement;
2) The error is the largest at the junction of the induction ring, and the measured wire should try to avoid this area;
3) Make sure the probe ring is inserted in place (to the bottom) during measurement, otherwise it will affect the measurement accuracy;
4) When measuring the measured signal, if there is a strong magnetic field interference source nearby (such as a magnetic field radiation source composed of multiple coils), it should be kept as far away as possible, otherwise it will cause measurement errors;
5) When measuring the measured signal, the probe should be kept as far away as possible from high-speed changing high-voltage signal interference sources (such as signals above 100V/us) or interference sources with frequencies above 1MHz, otherwise it will cause measurement errors;
6) To determine whether there are strong interference sources around, you can use the following method: Place the probe ring around the measured wire, do not clamp the wire, and measure the strength of the surrounding interference signal.

Care And Maintenance
1) Keep the probe clean and dry;
2) If cleaning is required, wipe it with a soft dry cloth, and do not use chemical cleaning agents;
3) When the probe is not in use, please put it in the packaging provided and place it in a cool, clean and dry place;
4) When transporting the probe, be sure to put it in the packaging provided by our company to prevent shock;
Do not pull the input and output lines hard, and avoid excessive twisting, bending or knotting.

Shenzhen Knowhow Technology Co., Ltd. is a high-tech enterprise focusing on the research, development, production and sales of Fume Extractor equipment and industrial Smoke Extractors. 

The company was founded in Shenzhen, China and is committed to providing efficient and environmentally friendly Fume Extractor solutions for various industrial, laboratory, medical and beauty fields.
Widely used in welding, laser cutting, 3D printing, dental clinics, laboratories and beauty industries.

The company's main products include:

1.   Smoke extractor: covering the smoke purification needs in many fields such as welding, laser cutting, 3D printing, dentistry, and laboratories.
2.   Smoke purifier: Provide air purification solutions for beauty salons, pharmacies, and office environments.
3.   Laser Fume Extractor: specially designed for laser cutting, engraving, welding and other industries to ensure a clean working environment without harmful gases.
4.   Mobile Fume Extractor: suitable for smoke purification in various mobile working environments.
Core advantages:
1.  Technological innovation: KNOKOO Company has a strong R&D team dedicated to the innovation of Fume Extractor technology and the optimization and upgrading of products.
2.  Efficient purification: All products adopt advanced multiple filtration systems, such as HEPA filters, activated carbon filters, etc., to ensure efficient purification of harmful gases and particulate matter.
3.  Environmental protection and health: KNOKOO Technology has always adhered to the concept of "innovation for a healthy environment" and is committed to protecting users' respiratory health and reducing the harm caused by air pollution.
4.  Global service network: The company's products sell well at home and abroad, and its services cover Europe, North America, Asia and other regions, providing comprehensive after-sales service guarantee.

Market application:
1. Industrial fields: including welding, laser cutting, 3D printing, PCB manufacturing and other industries.
2. Medical and health care: environments that require professional Fume Extractor, such as dental clinics and hospitals.
3. Beauty industry: Beauty salons, SPA centers and other places with high air quality requirements.
4. Laboratory and scientific research: suitable for various scientific research institutions, chemical laboratories, environmental monitoring, etc.

Through continuous technological innovation and market expansion, Shenzhen Knowhow Technology co.,limited. has become an industry-leading manufacturer of Fume Extractor equipment, 

and will continue to provide global users with a safer and healthier work and life with innovation, environmental protection and quality as its core.  environment.